Execellent
Creatives

GKL, walk together with you!

Shenzhen GK Lighting Co.,Ltd.
LED modules and LED strips lighting expert.

中文 English

Service Hotline400-6698-611

Your present location:Home >> Products >> SIGNGOOD >> Side Light Series >> Side light 4W module >> 12VDC 4W side light module
  • Name: 12VDC 4W side light module
  • No: MDW1A6D1
  • Views : 168

 

Description:

 

1,Adopt Genesis LED featured with high brightness,uniform and good antistatic ect;

2,DC12V power supply, constant current, one pcs cuttable;

3,15x45°optical lens, fashion appearance,aluminum  PCB with high conductivity and good heat dissipation;

4,Half packed injection process with ABS, Fireproof rating UL94V-0 and IP rating IP65.

 

Application:Lighting words and lighting box with thickness of 14-30cm.

 

Parameters of product

 

Voltage

DC12V

Color:

White

Power

4W

weight(20PCS):

532g

Lumens

310lm

Cascade Qty(Typ):

15PCS

Light efficacy

77lm/W

Fixing Ways:

Glass Glue or Screw ST2.9x12mm

Beam Angle

15x45°

Backing tape:

3M tape

LED Qty

1PCS

Working Temp:

-25~55

IP Rating

IP65

Storage Temp:

-40~80℃

Dimension

70*37*19.9mm

Warranty:

5 Year/50000Hrs

 

Parameters of light source:

 

LED Type

Genesis LED

LED Color Temp

6500-7000K

7000-8000K

CRI

>70

LED Brightness

280-313Lm

 

Lighting distribution:   

 

lighting spot                                                                                            lighting distribution curve

 

Dimension:(Unit: mm):

 

 

Installation and cable connecting diagram:

 

Applications:

 

Application

Thickness of L.Box (mm)

Size of L.Box(mm)

Install method  (mm)

Distance of each  module (mm)

Qty needed(PCS)

Surface Lux(LUX/m²)

Best Solution

150

3000x1500

3m/both side

170

34

900-1300

Solution 1

150

2000x1000

2m/single side

150

12

500-800

Solution 2

200

3500x2000

2.5m/both side

180

38

1000-1500

NotesAbove data is just for reference, tested with Acrylic panel of 3mm and Transmittance of 54.4%.

 

Installation and Notes:

 

(1)Use the power cable with 2x1.5mm²above (Select appropriate power cable based on the loading current ). Must select 0.75mm² / 18 # wire as power lines if be lengthened in order to avoid overloading bring overheat, causing adverse consequences;

(2)Single module is cuttable. Please cut the power cable first with Diagonal pliers in middle between two modules when module are connected, peel cable skin around 10 mm and connected with corresponding color  (white red line is positive , white-blue lines is negative). It should be well insulated with using special waterproof tape , finally check power conduction. It will be good only the cable will be pulled out with hands

(3) Please take out the releasing paper on backside at installation and stick in lighting box and fix them first. And mounted with two pcs ST2.9X12mm screw or with glass glue at two ends.

(4)The end module need to be well insulated with waterproof tape or waterproof connector to avoid short-circuit  and damage the product;

(5) Standard cascade is 15PCS, DC12V single powered.  Do not over-connect and avoid damage for excessive line overload current;

(6) The modules can not be used in outdoor. Do not operate or touch when powered..

Notes: please use power supply with safety certificated(short circuit, overload and over current protection)

The final interpretation of the product made by GK lighting all subject to change without notice.