Execellent
Creatives

GKL, walk together with you!

Shenzhen GK Lighting Co.,Ltd.
LED modules and LED strips lighting expert.

中文 English

Service Hotline400-6698-611

Your present location:Home >> Products >> SIGNGOOD >> Side Light Series >> Side light 2.8W module >> 12VDC 2.8W side light module
  • Name: 12VDC 2.8W side light module
  • No: MDW192B1
  • Views : 23

 

Description

 

1, adopt high quality 3535 light source adopts, high brightness, uniform color, good antistatic ability;

2, with DC12V power supply, constant voltage circuit design, 3pcs one group can be cut;

3, with 20 * 60° optical lens, beautiful shape, high conductivity aluminum PCB, cooling effect is good.

4, adopts ABS injection molding process, flame retardant grade up to UL94V-0, waterproof grade IP65.

Application: Mainly used in 15-25 cm advertising light boxes etc.

 

Application: Mainly used in 15-25 cm advertising light boxes etc.

 

Parameters

 

Operating voltage

DC12V

Color of the shell

White

Power

2.8W

Cascade Qty (pcs)

30PCS

Lighting effect

82lm/w

Weight30PCS)

770g

Beam angle

20°X 60°

Fixing way

Glass glue or ST2.5x10mm Screws

Luminous Flux

235lm

Back Tape

3M tape

Dimension(mm)

43*36*18.8mm

Operating temperature

-40~60℃

LED Qty

1LED/PCS

Storage temperature

-40~80℃

Protection class

IP65

Warranty

3 years

 

Parameter of light source

 

LED type

SMD3535

Lifespan

35000H

CRI

>70

LED CCT/WL

Cool white

8000-10000K

LED lumens

235LM

GK Lighting has the final product right, if there is any change, without prior notice.

 

Dimension of the productunitmm):

 

 

Installation and cable connecting diagram

 

 

Remarks of installation and application:

 

(1). Power lines use 2 x1.5mm² cable (according to the load current to select the corresponding power lines), if module cord need to lengthen must choose over 0.75mm²/ 18 # specifications wire, in order to avoid excessive overload causes the power cord fever, cause adverse consequences

(2). 3pcs led module can be cut, cut short when the module connection, centered with diagonal cutting pliers first cut off the power supply cord between the two modules, decortication around 10 mm, and the corresponding color (white red line is positive, white blue line for cathode) leads to a shares, then USES the special waterproof insulation waterproof adhesive tape, and final inspection power terminal guide connectivity and firm, with bare hands can't pull out wire line from terminal advisable

(3). Modules installed at the bottom of the first module of gum from type paper torn off, preliminary fixed on light boxes or advertising logo inside, and then USES the two ST2.5 x10mm self-tapping screw locking reinforcement, also can be used on both sides of the module, a fixed glass glue way

(4). The end of the module threads to use waterproof tape or wiring plug waterproof processing, avoid short-circuit damages to the products

(5). The module standard 30PCS, take DC12V single-ended power supply; please do not excess connection, avoid damage to the product line load current is too large

(6). The module cannot be completely exposed in the outdoor use, please do not charged touch, charged homework.

Note: Recommended to use with the relevant safety certification of switch power supply (with short circuit protection, over-voltage protection, over-current protection).