Execellent
Creatives

GKL, walk together with you!

Shenzhen GK Lighting Co.,Ltd.
LED modules and LED strips lighting expert.

中文 English

Service Hotline400-6698-611

Your present location:Home >> Products >> SIGNGOOD >> Back Light Series >> Back light 1.5W module >> 1.5W back light module
  • Name: 1.5W back light module
  • No: MPW191D1
  • Views : 93

 

Description

 

1, adopt high quality 5050 light source adopts, high brightness, uniform color, good antistatic ability;

2, with DC12V power supply, constant current circuit design, single led module can be cut;

3, with 165° optical lens, beautiful shape, high conductivity aluminum PCB, cooling effect is good.

4, adopts ABS injection molding process, flame retardant grade up to UL94V - 2, waterproof grade IP65.

Application: Mainly used in 8-25cm advertising light boxes etc.

 

Description of product

 

Operating voltage(V)

DC12V

Color of the shell

White

Power

1.5W

Wire

18AWG 15mm

Luminous Flux

130lm

Cascade Qty (pcs)

20PCS

Lighting effect

87lm/W

Fixing way

Glass glue or ST2.5x10mm Screws

Beam angle

165°

Back Tape

3M tape

Quantity of LED (pcs)

1LED

Operating temperature

-40~60℃

Protection class

IP65

Storage temperature

-40~80℃

Dimension(mm)

43x36x7.2mm

Warranty

3 years/35000H

 

Parameters of light source

 

Type of led

SMD5050

CT/WL of led

6000-6500K/8000-10000K

CRI

>70

Luminous flux

130-140lm

 

Dimension of the product(unit: mm)

 

 

Installation and cable connecting diagram:

 

 

Remarks of installation and application:

 

 (1). Power lines use 2 x1.5mm² cable (according to the load current to select the corresponding power lines), if module cord need to lengthen must choose over 0.75mm²/ 18 # specifications wire, in order to avoid excessive overload causes the power cord fever, cause adverse consequences;
 (2). Per led module can be cut, cut short when the module connection, centered with diagonal cutting pliers first cut off the power supply cord between the two modules, decortication around 10 mm, and the corresponding color (white red line is positive, white blue line for cathode) leads to a shares, then USES the special waterproof insulation waterproof adhesive tape, and final inspection power terminal guide connectivity and firm, with bare hands can't pull out wire line from terminal advisable;
(3). Modules installed at the bottom of the first module of gum from type paper torn off, preliminary fixed on light boxes or advertising logo inside, and then USES the two ST2.5 x10mm self-tapping screw locking reinforcement, also can be used on both sides of the module, a fixed glass glue way;
(4). The end of the module threads to use waterproof tape or wiring plug waterproof processing, avoid short-circuit damages to the products;
(5). The module standard 20 PCS, take DC12V single-ended power supply;Biggest cascade 40 PCS, take on both ends of the power supply, please do not excess connection, avoid damage to the product line load current is too large;
(6). The module cannot be completely exposed in the outdoor use, please do not charged touch, charged homework.

Note: Recommended to use with the relevant safety certification of switch power supply (with short circuit protection, over-voltage protection, over-current protection).

GK Lighting has the final product right, if there is any change, without prior notice.