Parameters of product:
Voltage(V)
|
DC 12
|
Material of shell
|
Fireproof PVC
|
Current(mA)
|
40
|
Color of the shell
|
White
|
Power(W)
|
0.48
|
Connecting cables
|
UL1007 20#
|
Emitting angle
|
120°
|
Color of connecting
|
Positive: red
negative: white
|
Luminous (lm)
|
38
|
Cascade quantity(pcs)
|
20
|
Dimension(mm)
|
55*15*6
|
Fix screw
|
M3
|
LED Qty(pcs)
|
2
|
Back glue
|
EVA sponge tape
|
Emitting color
|
Red/yellow/blue
Green/white
|
Operating temperature
|
-40~60℃
|
IP rate
|
IP65
|
Storage temperature
|
-60~80℃
|
IP type
|
Injection
|
Warranty
|
3 years
|
Parameters of product:
Type of led
|
SMD 5050
|
Emitting angle
|
120°
|
Life span
|
>30000H
|
Emitting color
|
Red/yellow/blue/green/white
|
VF
|
Red/yellow:1.9-2.2V blue/green/white:3.0-3.3V
|
CT/WL of led
|
white
|
red
|
yellow
|
blue
|
green
|
2800-15000 k
|
620-625 nm
|
588-592 nm
|
460-465 nm
|
520-525 nm
|
Luminous flux/
brightness
|
white
|
red
|
yellow
|
blue
|
green
|
18-22 lm
|
1300-1700 mcd
|
600-780 mcd
|
600-900 mcd
|
2500-3000 mcd
|
Dimension of the product (unit: mm):
Installation and cable connecting diagram:

Remarks of installation and application:
(A). Don`t stick the surface of the light by sharp tools.
(B). Don`t fix this product by sour glass glue or other soured adhesion;don`t operate or store this product in sour environment or the light will be vulcanized and the life span of the product will be reduced.
(C).Drive this product by 12V DC switch power supply, and the power should be suitable for the quantity of the led modules; do not connect this product to the utility directly, or the product will be burnt up.
(D). The total power of the led modules in series should be lower than 80% of the power of the driver, or the power supply will be burnt up probably,select the suitable thickness of the connecting cable according to the quantity of modules, and the connecting points should be wrapped by electrical tape.
(E). The maximum cascade quantity of this product is 20 pieces for one strip, and the brightness of the two ends will be different because of the voltage loss when you increase the quantity of the module.